Industrial PRO Interior Office

Industrial PRO Interior Office

Hover over the hotspots for building specifications.

Standard Specifications

Feature Specification
Warranty 5-year
Interior Clear Sidewall Height Interior Wall Height of 95 1/2"
Wall Framing 2x4 Lumber Spaced at 16" O.C., Double Top Plates and Single Bottom Plates on All Walls, Structural Headers at Door and Window Openings
Siding Type 50-Year Limited Warranty SmartSide Exterior Siding, 7/16" OSB Underlayment, Tyvek Moisture Barrier in between both layers
Trim Type 4" and 6" - 50-Year Limited Warranty Smart Trim
Floor Decking Floor Finished with 3/4" Tongue & Groove Premium Floor Decking
Roof Decking Roof Finished with 3/4" Tongue & Groove Premium Floor Decking, 7/16" OSB Underlayment, 15# Felt in between both layers
Eave Type N/A
Roof Felt Paper 15# Roof Felt
Owens Corning Shingles N/A
Rafters and Trusses 2x8 Rafters, Spacing Varies by Building Size and Roof Load
Roof Pitch at Peak Flat-Roof Designed to Hold up to 40 lbs per Square Foot
On-Site Installation Included* Yes (Delivery, Access, and/or Generator fees may apply)
Entry Door 3' x 6'8" In-Swing Steel Clad Entry Door w/ Keyed Lockset
Standard Windows 2 - 3' x 4' Double Pane, Slider, Tempered Glass
Floor Frame 2x4 Preservative Treated Lumber Spaced at 16" O.C. for the Subfloor Frame
Paint Two Tone Exterior and Single Color Interior
Base Skids 4x4 Preservative Treated Wood Skids w/Optional Steel Tube Forklift Pockets
Rooftop Storage Yes
Roof Load Capacity Designed for up to 40 lbs psf Roof Load
Roof Edge Protection N/A
Insulation R-13 Insulation in Walls and Ceiling
Building Wrap/Vapor Barrier Included on Walls and Roof
Interior Wall Finish 3/8" SmartSide Wood Grain Texture - Painted
Installed Electrical Pre-Wired
Installed Lighting 4' Fluorescent Lighting Spaced 6' O.C. (1 to 3 Lights depending on building length)
Fire Retardant Fire Retardant Finishes Available as an Option
HVAC Available As an Option

*Heights listed are approximations, and are rounded to the nearest inch. Interior clear sidewall heights are measured from the floor to the top of the top plate. Overall heights are measured from the ground to the peak, and may vary based on type of foundation or the addition of skids or leveling blocks.